Your Cart

Your cart is empty

Home  >  Hunter Douglas Parts  >  Duette Shade Parts  >  Duette ... Lift

Hunter Douglas PowerRise 1.0 High Power Blind / Shade Lift Motor
Hunter Douglas PowerRise 1.0 High Power Blind / Shade Lift Motor
Hunter Douglas PowerRise 1.0 OLD Motor
Sale price: $0.00

Hunter Douglas PowerRise 1.0 High Power Blind /Shade Lift Motor

This motor was dis-continued in January 2013. We have NO stock and Hunter Douglas has no stock.

From time we do take in used shades and offer the used motors and components on our "Special Offers" page. We have kept this page up for your reference only...

As a PowerRise 1.0 shade owner, your options are:

1) Search eBay for PowerRise shades you can purchase for parts.
2) Send the shade back to Hunter Douglas through your local dealer to have an upgraded lift system (Platinum Technology 2.1) retrofitted to your shade for a charge starting around $350.00.
3) Buy a new shade.

  • High power for larger shades
  • Replacement Motor for all PowerRise / Power Rise Duette and Applause Honeycomb Shades and Brilliance Pleated Shades made Before May 2010 and on or After May 2003. To determine when your shade was made < Click Here>. Also see "Detailed Images" (Below) for more pictures of motors.
  • Hunter Douglas Motor for RIGHT SIDE Part# PCN 2981273048
  • Hunter Douglas Motor for LEFT SIDE Part# PCN 2981274048

If your PowerRise shade has stopped working it is usually one of four problems:

  1. Shade has no power - Replace the batteries. Check the battery tube for any cracks and make sure the tube is firmly seated in the contacts.
  2. Motor is burned out - Replace the motor
  3. IR Eye board is burned out - Replace IR-Eye Board
  4. Lift Limit Switch - Broken/Faulty, Needs adjusted or lift cord is not in front of metal switch arm. Limit Switch Troubleshooting
  5. Reset Shade Limits - Lower shade completely. If the motor is not responding then may have to slip motor out of Lift-Cord-Shaft to dis-engage shaft then re-engage. Once shade is fully lowered, point remote controller at IR-Eye in headrail or satelite eye and press the down button and hold for 5+ seconds then hit the Up button. If shade does not respond then see steps 1-4 above.

Availability: Discontinued with NO STOCK!


Add Review

Please sign-in to post a review