Somfy CL32 WireFree^TM (RTS) Lift Motor

New Item 10-2014 and direct replacement for CT32

• The NEW CL32 WireFree Lift Motor is a direct replacement for the old CT32 motor (part#:1000494) and is exactly the same size and uses all the same Headrail and Drive components as the old CT32. The differences are: 1) Integrated Power Lead. 2) Integrated Reset Button. 3) Improved Encoder 4)Color.
  
• 12 Volt DC Operation @ 0.7 amp 68 rpm Note: Old CT32 is rated @ 1.5 amps and 72 RPM which means that the new CL32 motor is a bit slower!
  
• WireFree - No wiring neccessary. Powered with a battery tube.
  
• Compatible with all Somfy (RTS) Controls
• Capable of lifting Honeycomb-Duette, Pleated and Roman type shades up to 15 lbs.
• Fits in many manufacturer headrails with headrail and shaft adapters listed under "Related Products".
• Can be integrated into many popular home automation controllers such as SmartThings^®, Iris^®, Wink^®, Vera^®, Indigo^®, ADT-Pulse^® and many others using a ZRTSI (ZWave Controller), Dry Contact Interface or URTSI (Universal RTS Interface).
  
• 12 Volt Plug in transformer recommended for shades greater than 60"W x 60"H
• Dimensions: Length 4.19"(113.95mm), Width: 1.25"(31.75mm), Height: 1.23"(31.24mm)
  
• Somfy CAT # 1002422 Alternate Part#: 5125977B

 CL32 Quick Programming Guide 0.5Mb
 CL32 omplete Programming Guide
 Hardwiring for a Single or Double Motor 
 Somfy CL32 RTS Spec-Sheet
Somfy WireFree Databook 05-2019 8.8Mb

     Somfy Video: How to Adjust Lower Limit 

For your Convenience please review the following chart below for help in purchasing the correct Headrail & Shaft adapter for the headrail type of your shade.

 Shade Size Limitations 5.2Mb

 * When ordering be sure to check "Additional Options" for components that may be needed to motorize if not already purchased.  Shaft adapters, power source and controller are required to have a fully operable Lift system.

Note: If connecting the CL32 Motor to a Dual Battery Tube, then choose the "Y-Harness" connector listed below. The old Y-Harness connector will not work with this new motor.

Availabilty: Stocked Item
Ships: 12-24 Hours