Somfy R28 Li-Ion Wireless ZigBee Roll-Up Motor #1241755
Note: If using this Motor to replace the
discontinued LT30 RTS Motor (Made 2015 or before), you will need
to order a new "Crown". The existing rubber
"Drive" wheel can be transferred from the
LT30 to the new R28 motor. See Below for
more details.
- 12 Volt DC Operation @ 0.8Amp, 10-28 RPM adjustable
- WireFree with built-in Lithium-Ion 12VDC 2600 mAh rechargable batteries- no wiring needed.
- Installation and programming done directly for the App with intuitive step by step programming instructions.
- Lift Capacity (1.1Nm) - 9.68 lbs/1.25"Tube - 8.07 lbs/1.50"Tube
- Soft Stop: Speed is reduced when the shade comes to a stop
- Dimensions - Overall: 22.83" L x 1.88" Dia. - Insertion Dia.: 0.99"- Tube insertion length: 22.51". Minumum Shade width=25" Bracket to Bracket
- Motor can be easily integrated into many popular home automation controllers. Native compatibility with Zigbee 3.0 controllers (including Samsung Smartthings).
- Installation and programming done directly from the app: intuitive step-by-step programming instructions
- Intergrated button on the motor head allows for leaving the network and full reset.
- Dedicated maintenance tool, Serv-e-Go.
- Premieum quality battery that can be replaced.
- 5-Year Somfy Warranty.
- Somfy CAT. # 1241755
Uses: [ When was my Hunter Douglas blind made? ]
- Hunter Douglas Silhouette™ 2" & 3" Vane size Shadings (made after March 2004) For 4" Vane...use the ST30 24V DC Sonnese motor.
- Hunter Douglas Nantucket™ (made after March 2004)
- Hunter Douglas Vignette™ Shadings
- Roman, Balloon, Austrian, London and Woven Wood Shades. Click here for Assembled Lift Kits
- Comfortex Shangri-La Shades
- Verosol Vienna Sheer Shades
- Rollease 1.25" & 1.50" Shade roller tubes. Rollease Tube Profile Picture
- Louvolite 1-5/8" Tube
Size Limitations:
| Blind Type |
Max Size |
|
Silhouette®/Nantucket® Light Filtering Fabric 2” & 3” Vane made after March 2004
 How To Instructions
R28 Native Crown Removal
R28 Native Crown Removal Video
|
120”x 120” |
| Silhouette®/Nantucket® Blockout Fabric2” & 3” Vane made after March 2004 How To Instructions |
120”x 120” |
Vignette® all vane sizes call for instructions
|
96” x 120” |
|
|
| Shangri-La/Vienna all vane sizes |
114” x 120” |
| Blackout Roller Shade on 1.5" Tube |
96" x 120” |
| 3% openness Roller Shade on 1.25” Tube |
96" x 120" |
| 5% openness Roller Shade on 1.25” Tube |
96" x 120” |
| 10% openness Roller Shade on 1.25” Tube |
96” x 120" |
|
|
Controls: Control Options
The R28 motor is controlled by wireless controls which include Handheld Remotes. (This area needs updated with other control options.)
Somfy R28 1241755 Li-Ion Specifications .9Mb
Somfy R28 Installation/Programming Guide 1.1Mb
Notes for LT30 to R28 Replacement:
List of Available Crowns & Drives for R28 Motor
When replacing an LT30 motor with the new R28 motor, a new Crown will be needed. Click the "Crown" list below to locate your tube profile and size. You might have to remove the old LT30 motor from the shade and measure the inside diameter of the tube to determine correct size and type of Crown. The rubber Drive wheel can be transferred from the old LT30 motor to the new R28 motor shaft using the same screw. < Rollease Tube Profile and Sizes >
Additional Note: A new motor Adapter Plate (see below) may also be needed to attach the R28 motor end to the Shade Mounting Bracket for Rollease Skyline Bracket Systems. If your Rollease Brackets = R-Series then no Adapter Plate needed if Skyline Series then New Adapter Plate needed. If your system is LouvoLite and the plate was fastened to the LT30 motor with two screws then it will transfer to R28 motor if not then order a new LouvoLite Adapter Plate & Drive below.
Parts Needed: [Crown & Drive, Power Source and Controller] are required to have a fully operable roll up system.
Availability: Not Stocked-Special Order with 5-10 day delivery
Ships: 2-5 Days from Somfy New Jersey
