Somfy Sonesse ST30 DCT 24V-DC Rollup Motor #1241146
- This new motor (10-01-23) replaces the discontinued Black ST30-DCT motor. A new "Crown" will need to be selected from the "Crown" Drop Down Box below. The rubber drive wheel at the end of the motor will transfer to this new motor. A new Motor Adapter Plate may also be needed if the old motor does not have one. Note: The old white plastic Skyline Adapter Plate will transfer to new motor with the two existing screws.
- Ultra Quiet Motor
- 24 Volt DC operation (low voltage wiring)
- Controlled with Somfy Dry Contact Wall Switch #1800219
- Applications: Roller Shades, Screen Shades, Austrian Shades, Roman Shades, and Woven Shades
- Lift Capacity: 1.5" Tube = 17.6 lbs., 2.0" Tube = 13.2 lbs, 2.5" Tube =11.0 lbs.
- Weight: approx 1.5lbs
- Somfy CAT. #1421146 Older:# 1001524 Old#: 5060996, 1000460
Uses:
- Sheer type shadings including Hunter Douglas SilhouetteTM, NantucketTM, PirouetteTM, VignetteTM (**May require roller tube replacement on someHunter Douglas products)
- ShangRi-La, Vienna Shades
- Roman, Balloon, Austrian, London and Woven Wood Shades. Click here for Assembled Lift Kits
- Rollease Standard 1.50" Roller Shade/Screen Tubes
- Rollease Skyline 1.50" Roller Shade/Screen Tubes
- Louvolite 1-5/8" Tube
- Cord Take-Up System (CTS) allows many other blind types to be motorized: Celluar, Pleated, 1"&2" Wood and Faux Blinds
Size Limitations:
Blind Type |
Max Size |
Silhouette®/Nantucket® Light Filtering Fabric 2”, 3”, 4" Vane |
120”x 120” |
Silhouette®/Nantucket® Blockout Fabric2” & 3” Vane |
120”x 120” |
Vignette® all vane sizes |
120” x 120” |
Pirouette® all vane sizes |
96” x 120” |
Shangri-La/Vienna all vane sizes |
114” x 120” |
1% openness Roller Shade on 1.50" Tube |
120” x 90” |
3% openness Roller Shade on 1.50” Tube |
120” x 96” |
5% openness Roller Shade on 1.50” Tube |
120” x 120” |
10% openness Roller Shade on 1.50” Tube |
120” x 144” |
Blockout Roller Shade on 1.50” Tube |
120” x 96” |
**Call for instructions on motorizing each specific shade type as each shade requires different parts to do it correctly!. We have written instructions that can be emailed.
Roller Shade Systems: A comprehensive guide of Fascia's, Cassettes, Blackout Systems and Skylight Shades
Wiring & Power:
The Somfy Sonesse ST30 Motor can be powered with a single 24V DC plug-in wall transformer or hardwired for more complex installations with wire run inside the walls to a central Power Panel.
Plug-in wall transformers may be ordered on this page. Power Panel Enclosure Kits and other components may be ordered separately on their respective pages.
When ordering be sure to check "Additional Options" for components that may be needed to motorize if not already purchased. Crown & Drive, Power Source and Controller are required to have a fully operable roll up system. See Related Products (below) for additional components.
Availability: Special Order ships directly from Somfy
Ships: 5-7 Days directly from Somfy New Jersey