10 Motor 18V DC x 10 Amp Fused Power Distribution Panel
Safe, Reliable Power for projects that require more than plug-in transformers or battery wands to power your window treatment motors. This Power Panel is used primarily for Hunter Douglas 18V DC PowerView® and 18V DC Platinum Technology® Shade Motors. Do not use this panel for the old 12 Volt PowerRise Shades! The motors will be ruined. If you don't know what you are doing then don't do it!!!
Custom Power Panel Features Include:
- Fully wired and ready to install right out of the box. Includes a 6Ft power lead that plugs directly into a 110VAC wall outlet or surge strip.
- Used to Power Hunter Douglas PowerView® and Platinum Technology® 18 Volt shades
- (1) UL-Listed 10"W x 12"L x 4.0"D NEMA Type 1 Enclosure with Continuous Hinge, Black Quarter Turn Latch, .063" Carbon Steel-Gray Powder Coated inside and out, 4-Mounting holes, One 6 Ft 18AWG Grounded Power Cord. One shade power wire knockout and clamp is provided for every three shades. Wire Knockout location can be specified at Top or Bottom of Panel.
- (1) UL-Listed Meanwell LRS-150-15 open frame switching and regulated transformer delivers 10 Amps of power. Input Voltage 90~132vac / 180~265 vac @ 3.0amps selectable by switch. Operating Temperature Range: -30~+70°C. High Efficiency power supply with Standard Protections: Short Circuit, Overload, Over Voltage and Over Temperature.
- (1) 10 Motor Power Distribution Board with each of the 10 circuits protected with 2-Amp ATC Blade Type automotive fuse.
- PowerView® and Platinum Technology® Motors draw approximately 0.68 amps @ 18VDC each.
- Approximate Weight 18 Lbs
- 3 Year Full Warranty on all parts
Always be sure to plug your Power Panel into a quality surge strip to provide additional protection from Power Surges and Lightning Stikes that will damage and burn out DC motors.
Availability: In Stock - Custom Made per order
Ships: 3-5 days
